• Entry/Exit Delay.

     In order to leave enough time to exit/enter your house without triggering the sensors, you can set certain delay time for the system

  • How PSTN alarm system make alert notice?

     Make sure the cables are correctly connected. When accessory detects emergency, the panel and siren will hoot and users can receive alert calls.

  • How can I receive an alert message and call?

     Please store the notice phone numbers first. When there is an alert, the panel will send SMS and call to them by order with 3 rounds until the panel is disarmed.

  • How to download Apps?

     Please input the keyword "gsm alarme" and download the Apps from the Google Play or Apple Store. Or Scan the QR code in the packing.

  • What's the maximum range an alarm system can cover?

     The transmitting range vary in different environment.Usually,control panel can receive signal from detectors within 200 square meters range in an ordinary house.It is recommended to install the panel in living room(open space) as wall and appliance will block signal.

  • I insert the SIM card in the panel, but it doesn't work?

    Please make sure the SIM card is in GSM network, not CDMA. Please make sure the PIN code is unlocked by cell phone. When you insert the SIM card, the GSM indicator flashes once in second, it's searching the network. If it flashes twice in seconds, means the GSM signal is received. If the GSM signal is abnormal, please try to change a new SIM card, or change a place.

  • RF frequency & GSM frequency

    Wale alarm systems are all wireless with radio frequency 315Mhz or 433Mhz. GSM alarm systems are applicable for universal, with GSM frequency 850/900/1800/1900Mhz.

  • I am out of home, How can I arm the system?

    For PSTN alarm system,first you should enable the phone remote control function.When you are out,call the phone number and input the command to remote control the system.For GSM alarm system,just send commands through SMS or Apps by smart phone.

  • How many zones?

    The system can support 150pcs wireless detectors, one zone can support 8 detectors, totally can set 99 or 120 zones. 

  • Home Mode?

    1. Please follow the manual to set the jammers of accessory on circuit board.
    2. Press home mode button on panel keypad or remote control, or set by SMS or Apps 
    3. The result is that all the sensors in normal zone are armed except those accessories which are disarmed so that you can move freely at home.

  • How can I know which room alarms?

    The panel has Zone LED indicators. The LED indicator will flash when the corresponding zone alarms for your checking.